Teradek Bolt 500

Bolt 500 3G-SDI/HDMI Video Transmitter

The Bolt 500 3G-SDI/HDMI Video Transmitter from Teradek transmits visually lossless video up to 500′ with no delay. Within the unlicensed 5 GHz channel range, you can use multiple Bolts in one location without any interference. Thanks to built-in cross-conversion supported by every Bolt model, the transmitter supports real-time standards and cross-conversion from receiver to transmitter, allowing you to automatically convert resolution, frame rate, and inputs/outputs (HDMI / 3G-SDI) without any additional hardware. The built-in HDMI to SDI converter allows you to connect both your on-camera monitor and video source via the same device, thereby making Bolt 500 suitable for use with MoVI and other separately available gimbals.Eleven 5 GHz channels Supports full HD (1080p) resolution Low latency of up to 0.001 sec Integrated 3D LUT technology Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt’s OSD Bolt’s USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic Housed in a hardened aluminum chassis 1/4″-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for powerUPC: 854980006688 Bolt 500 3G-SDI/HDMI Video ReceiverThe Bolt 500 3G-SDI/HDMI Video Receiver from Teradek receives visually lossless video from up to 500′ away with no delay. With 40 MHz channel, you can use multiple Bolts in one location without any interference. Thanks to built-in cross-conversion supported by every Bolt model, the receiver supports real-time standards and cross-conversion from receiver to transmitter, allowing you to automatically convert resolution, frame rate, and inputs/outputs without any additional hardware.Eleven 40 MHz channels Supports full HD (1080p) resolution Low latency of up to 0.001 sec Integrated 3D LUT technology Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt’s OSD Bolt’s USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic Housed in a hardened aluminum chassis 1/4″-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power